Tuesday, August 11, 2009

Generate Homemade Electricity Yourself

An alternative way to create electricity had always remained a big issue for every scientist and common man. The best possible way to produce alternate electricity is by wind power. Now the question arises is "how you can actually do it?" Thinking? You don't have to. I am suggesting a very good and effective method to do it. All you need is to make a wind turbine or a windmill (same thing).

Here goes the method to make it. It's very simple and anyone can make it by his own and using his home spare things.

Blades of wind turbine are turned by wind and the shaft spins, which is connected to the generator and electricity is produced.

Main parts of a wind turbine are:-

1) A generator
2) Blades
3) A mounting
4) A tower
5) Batteries
6) Electronic control system

A 30volt motor is needed. Now hub and blades are to be connected. For blades, take one 24 inch long pipe (may be pvc) and then cut it into 3 pieces by its circumference. For bolting blades into hub, a toothed pulley of 5 inches can be used, where the motor shaft can fit into. Now assemble blades with hub, by drilling holes.

Mounting of the turbine can be done by strapping the motor into a 2 X 4 wood piece. Heavy aluminum sheet can be used to make tail, which will keep turning into wind. 3 feet diameter plywood cutout can be used for tower base. A U-shaped assembly having a 1.5inch Tee in the middle has to be built. Batteries with blocking diode connected to batteries (for power prevention) are needed to spin motor/generator. Charge controller should be connected for running everything. The Controller is connected to wind turbine. Battery supply all load and needs to be charged. Well, you are done!

I know it's probably very difficult for you to understand all this, if you have never done anything similar before, that's why if you want to make your own windmill, I highly recommend you to use professional instructions, when assembling everything. Click here to find out to get them.

No comments:

Post a Comment